Home
>
News > How does rationality use biomass pellet …
How does rationality use biomass pellet machine
1, biomass pellet machine long-term work, should be fixed on the concrete foundation. If often change the job position, biomass pellet machine and motor to be installed on the made of Angle iron frame, if biomass pellet machine and diesel power, should the output power matching between them, namely the diesel engine power output slightly bigger than the mill output power, and make the two pulley groove, pulley end in the same plane.
2, biomass pellet machine after installation to check the fastening state of fasteners, if there is loose must be tightened.
3, to check whether the tightness of the transmission belt is appropriate, the motor shaft and sawdust particles machine shaft is parallel.
4, before the biomass pellet machine, first turn the motor rotor by hand, check whether the teeth, hammer and motor rotor is flexible and reliable, there is no collision in the shell, the rotation direction of the motor rotor is the same as the direction of the arrow on the machine, the motor and pellet machine lubrication is good.
5. It is unnecessary to change the pulley at will to prevent the crushing chamber from exploding due to too high speed or affecting the working efficiency due to too low speed.
6. After the crushing platform runs, idle for 2 to 3 minutes, and no abnormal phenomena are observed before feeding.
7, work to timely pay attention to the running state of biomass pellet machine, feed to symmetrical, prevent blocking stuffy car, can not run for a long time overload. In case of vibration, noise, high temperature of the bearing and the body, or material spraying, etc., please stop and check first, and then continue to work after troubleshooting.
8. The raw materials to be crushed should be carefully checked to prevent hard pieces such as copper, iron and stone from entering the crushing chamber and causing accidents.
9, operators do not have to wear gloves, feeding should go to the side of the biomass pellet machine, to prevent rebound sunders hit the face.
