Causes and treatment methods of blockage caused by wood pellet machine

Sawdust pellet machines often encounter blockages during use, which is a headache for many customers. Let's look at its working principle first, and then analyze the cause and treatment of the blockage. The working principle of the wood pellet machine is to crush large wood chips with a crusher. The length and water content of the material are within the specified range. The material is evenly sent by the belt conveyor to the material port above the molding machine. . However, some operators may cause blockage of the wood pellet machine due to improper operation of various aspects when using the equipment. How should you deal with this problem?
1. The discharge pipe is not smooth or blocked, and if the feed is too fast, the air outlet of the wood pellet machine will be blocked; after the fault is detected, the vent should be cleared first and the feed amount adjusted to make the equipment operate normally.
2. Hammer broken, aging, screen hole closed, broken, too high moisture content of crushed materials will block the machine. The broken and aging hammers should be regularly updated, and the screen should be regularly checked. This can improve production efficiency and Keep the device from clogging.
How should I deal with the blockage of the wood pellet machine? I believe that when you encounter similar problems, you can quickly find a solution. For more information about wood pellet machine, please stay tuned to our website.